Who is allowed to sign off Davie work
Mold assessment is licensed by the state rather than permitted by the town, which is the opposite of how plumbing or electrical work is handled here. No Broward municipality issues a mold permit or keeps a mold register: the assessor licence comes from the Florida Department of Business and Professional Regulation under Chapter 468 Part XVI, it is searchable on the state register, and section 468.8419 bars the holder from remediating a structure they assessed within twelve months. That is identical at every address in the county and we will say so rather than inventing a local office. The practical thing Davie adds is the need to say at the outset which of its two building types the property is, because the price, the method and the likely findings all follow from that rather than from the address.
That licensing position is the whole of this page, because clearance is the only stage of a mold job with a defined outcome and therefore the one where the independence of whoever issues it matters most. Section 468.8419 bars a licensed remediator from performing a mold assessment on a structure they remediated within the previous twelve months, and a clearance test is an assessment. The bar applies to it, and the penalties escalate from a second-degree misdemeanour to a third-degree felony on repeated violations.
The other half is the criteria. A clearance test is not a general opinion that things look better: it is a comparison against a written protocol produced before the work started, naming the affected materials, the removal lines, the containment specification and the numbers that constitute a pass. Where no protocol was written there is nothing to verify against, and we will say so rather than issuing a certificate against a feeling.
And the sequence is not negotiable: inside the containment, before it comes down, before anything is rebuilt. Once the barriers are removed, the air in that space is the air of the whole building and a sample from it establishes nothing about the work area. Being asked to clear a finished, painted room in Davie is the single most common way this goes wrong, and re-erecting a containment to test properly costs a great deal more than testing in the right order.
The commercial position in Davie is the one published on every page of this site, because the rate card is not a Fort Lauderdale rate card. A flat price by property size, agreed before anyone drives out, with the accredited laboratory fee already inside it. It does not rise if the samples come back positive, nothing is added for the drive, and we take no payment of any kind from anyone who removes mold.

What Davie itself changes
The buildings in Davie
Davie carries 41,755 units at a 1989 median, and the headline number hides an unusually wide spread. Forty per cent is single-family detached, much of it on large lots in the town's long-standing equestrian districts, while 13.7% is manufactured housing, the second-highest share in the county. Those two building types have almost nothing in common: one is a site-built slab house on an acre, the other a raised floor assembly over bare ground. An inspection approach designed for either is wrong for the other, and Davie has plenty of both.
Where the water comes from
The town runs west to the Everglades boundary, and the western parts sit on land where the water table is close to the surface and managed by canal rather than by drainage away. On a large lot in that position, landscape irrigation, a pool and the natural table together keep the ground around a building damp through most of the year, which narrows the margin on a slab edge and on any part of a structure close to grade. Private wells and septic systems are present in parts of the town.
The cooling systems here
Split systems on the site-built stock, often with long duct runs to reach the ends of a sprawling single-storey plan, and packaged units or floor-ducted splits in the manufactured homes. On a large house the long duct run is the thing worth examining: the further a run goes across a hot attic, the more likely its insulation has failed somewhere along it, and a section of duct condensing over a ceiling produces a stain with no plumbing anywhere near it.